eWillys | Your source for Jeep and Willys deals, mods and more (2024)

UPDATE:**SOLD** Were $7400 & $2300.

A working jeep and a parts jeep.

“1946 CJ2A WILLY’S COMPLETE REBUILD, GREAT RUNNING JEEP, ASKING$7,400. I ALSO HAVE A 1946 CJ2A IN PARTS FOR SALE $2300. IN ADDITION TO THESE 2 JEEPS I HAVE TONS OF PARTS, WAY TOO MUCH TO LIST. FRAME, AXLES ETC.”

UPDATE: **SOLD** Was Make Offer

MIght be worth a look.

“1963 cj3 b 4 cyl hurricane flat head 28 in gateway buckshots 8000 lb warn winch runs good MAKE OFFER”

UPDATE:**SOLD** Was $5500.

(09/17/2014) This jeep has an M-38 body and parts.

“Just finished this project and have to let it go – too many other boy toys in the garage. This is a project jeep built primarily from left over parts of prior projects so is a composite of both military and civilian, 1940’s and 1950’s. Rebuilt in style of M38 Navy jeep. Clear Oregon title as a 1947 CJ; new stuff includes: brake shoes, cylinders, lines and master cylinder; battery; coil; rebuilt starter (12 volt); military tires; solex carb. Extremely tight T90 transmission – doesn’t jump out of 2nd at all. Runs good but smokes. Comes with another rebuilt engine which has a knock.”

UPDATE: **SOLD** Was $1650.

Runs and plows.

“I have one 1962 Willys Jeep . Original cond. w/ 39 k miles . Has the 134 CI. 4 cyl . Hi/ low range ,
w lockout hubs. Has Fisher speedcaster plow . Runs/drives, Needs Brakes and sheet metal work. Gas tank has leak . Great candidate for restoration .
Unit has Kelly Hardtop ( removable ) doors windows work . Will include 2 full sides (cowl to tail ) with sale. Jeep comes with Conn. title.”

UPDATE: Was $3800. **SOLD**

Looks like an F-head has been added.

“1943 jeep military ford gps, 5 new tires, new fuel pump, good tag& title, carburetor just started leaking! Other than that pretty nice old jeep. May trade for old VW bug or Chevy truck. Call or text.”

UPDATE: Price dropped to $1200.

(08/03/2014) It runs, but still needs some work.

“1953 Willys CJ3B Jeep. Clean Title and VIN plate. Was going to be a yard vehicle. Replaced badly rusted rear body with Steel frame and wood deck. New brake master cylinder, clutch and pressure plate. In process of converting to 12volt, new alternator and battery. Started to replace wiring. Patching to rest of body started. I have the hardtop and doors also. Runs pretty good, number 3 cylinder is a little lower than the rest (@60psi). I just am running out of time to work on it and need the space.”

http://pittsburgh.craigslist.org/cto/4742591516.html

It’s a project.

“53 JEEP WILLYS CJ3B (PROJECT)
V8 CHEVY CONVERTION (4.6 283 ENGINE)
3 SPEED (T90) 4X4
RUNNING ENGINE
DANA 44 (528 GEARS)”

http://newjersey.craigslist.org/cto/4744843192.html

UPDATE: **SOLD** Was$4000.

Needs a tranny.

“I have a 46 cj2a sand jeep it has a sbc fender well headers
Aluminum intake holy 2 barrel carb after market alumin radiator
3000cfm electric fan suspension seats 5 point harness it has a jeep Cherokee 2wd front axle disc brakes in the front shackle reversal in the front older Fox shocks with resavoirs Spring over Ford 9 inch 4:56 gears 29 spline axles spool 1650 paddles on 15×15 100% offset wheels
Has the desert trake tires up front b&m shifter runs awesome needs a trans put In I had a mild build th350 in at one time but is no longer in it I have some,extra parts I have. T-10 with a dana 20 I could through it is complete with bell housing trans advance adapeter to t-case
Looking for cash or trade for cj7 or yj possible cj5 cash is king”

Project or parts jeep.

“I have this 1947 CJ2 Willys Jeep for sale. I was going to rebuild it but my friend passed away. He had the skills, not me. The body and floor boards are in surprisingly good shape. The only missing parts are an engine and transmission. (It had a straight 6 that was bad.) I have the original lights, grill, radiator, gas tank, both front seats, windshield, and roll bar. I also have (from a Jeep Cherokee) a power steering column and pump, and the fuel tank which is fuel injection capable. ”

http://loz.craigslist.org/cto/4736439972.html

UPDATE: Status Unknown. Was $150.

There’s value here.

“I have cut up my parts Jeep–1953 M-38 , I kept the motor and trans, body was shot. If it’s not sold I will scrap it. It has clear title. The two rear tires & wheels don’t go with it. Come take front end or steering[any parts off] and I’ll scrap the rest. $150 obo”

UPDATE:Still Available

(02/25/2014) Here’s an unusual hunting rig!

“59 Jeep Willys FC 170 4×4 Project Almost Done —– single Seats in cab and on bed Recovered now (bench on dog box still tan ) — Hunting rig – Dog box – – Roof rack seating — Game hoist – 8000 warn – Or great parade rig – list goes on – NOW $11250 obo Trades welcome NEEDS TO GO no room to store NEED CASH NOW !!! Trailer NOT INCLUDED but will sell for right deal —– Trade for nice RV – motorhome – 5th wheel – or bumper pull ( Must be nice) —- Razor – Ranger – Model A or T – Muscle car – Vette ( any condition cars or ratrods ) – Enclosed 2 car trailer – or ? list goes on What ya have ? May do Strait trade even if I trade down if its what I want”

http://eastoregon.craigslist.org/cto/4741247456.html

UPDATE:**SOLD** Was $6500.

(10/08/2014) Looks solid.

“In great condition, brand new top and runs great asking 6500 obo”

UPDATE: **SOLD** Was $500.

(06/09/2014) Just the box is for sale.

“Utility bed ONLY… No truck. 1962 Stahl utility box bed, From 1962 Jeep FC170. 4X9 between boxes. All doors latch but no key for locking. VERY HEAVY steel construction. good condition. ….http://youtu.be/rt6Oh_GbV-o“

UPDATE: Still Available

The ad suggests that perhaps the buyer can decipher the VIN, because they couldn’t.So, it’s a little surprising whenthe sellersnote theyhave experience in ‘All Aspects of the Auto Industry’! Apparently, that’s true expect when it pertains to vintage jeeps perhaps?

“1947 (we believe) Jeep Willys CJ 2A For parts ! Motors turns! VIN tags present and perhaps you can decipher! Van Allen Auto Sales Is A FULL Service Center With Over 45 Years Experience In All Aspects Of The Auto Industry!Our Staff Are Each Knowledgable Car People Ready To Help Make Your Experience With Us A Good One, Before and After the sale!”

http://albany.craigslist.org/ptd/4743179865.html

Taken by Life Magazine photographerFrank Scherschel, I found this photo at the picturesdotblog site. Note the use of the parking brake! Also note the “press” sign on the front of the jeep. Do you suppose the wire cutter on the front of the press jeep was cut so that it wouldn’t interfere with photos?

A view of the same town seventy years later (thanks Tom!):

This article about the creation of mobile border control searchlight jeeps was published in the April 1956 issue of Willys News. A similar article with additional photos appeared in the February 1956 issue of Globetrotter.

Steve forwarded this early video. I would never want that hand drill duty!

It appears the August 1946 issue of Fortune Magazine has an interesting Willys Overland article.

“This complete Fortune magazine is in really nice original condition. The cover has no edge tears or creases, but there is a scuff on the right and bottom edges. The lower left edge shows minor scuffs. The illustration is vivid against a clean background.

The spine has minor scuffs at the top and bottom. The magazine is still securely bound. As I thumb thru this magazine, the inside pages appear clean with no tears, creases or dog eared corners. The back cover has no edge tears or creases. The illustration is vivid against a nice and clean background.”

View all the information on eBay

No guarantee all the pieces are there.

“This is a nice vintage 1941-47 Tuco Picture Puzzle, “Willys “Jeep” Used in Attack”, 300-500 pieces. Tuco – “T” he “U” pson “Co”, was a subsidiary of the Upson Company that produced 3/16″ wallboard for home construction. Their puzzles originally sold for 69 cents, and are “extra thick” pieces made from their wallboard that were extremely popular. The company survived the depression by making puzzles on their wallboard when construction dwindled. Box is very good; pieces are excellent. Believe puzzle is complete; no odors or damage. Very nice, clean, estate item. See pics for details. Questions, please email. Will combine shipping on multiple items. International bidders please email before bidding to determine shipping costs. Good luck bidding!”

View all of the sellers items on eBay

UPDATE: **SOLD** Was on eBay at $390

Former dealership sign55″ WIDE x 24″ TALL x 3″ DEEP.

Due to the weight & oversized packaging, this item can be packed & shipped FedEx or UPS, which means, we can make arrangments to pack & ship for you, and we will charge you whatever the costs are for packing & shipping to your location. We are using a third party shipper and just passing on the costs to you. and Sorry, we can not ship to a P.O. Box. However, this item is available for local pick-up in NY.

THIS WEEK ONLY, SPECIAL LOW STARTING BID, Bid Now!! First bid could WIN!!! Don’t miss out!!!

You will be bidding on a VERY HARD TO FIND VINTAGE ( We bet you don’t see these everyday. Here’s your chance at a rare piece of history. And it does look beautiful.):

IN GREAT AS PICTURED (Always see photographs for the best condition description, it’s that nice. Good luck.), UN-BENT, UN-RUSTED, UN-FADED, AND UN-ABUSED CONDITION, CLASSIC JEEP LOGO, AUTHENTIC DEALERSHIP ADVERTISING DISPLAY SIGN, HUGE EXTRA LARGE SIZE Approx. 55″ WIDE x 24″ TALL x 3″ DEEP, 3D HARD HEAVY PLASTIC AND MIRROR CHROME PLASTIC, ADVERTISING DISPLAY SIGN. EXTRA EXTRA HEAVY DUTY QUALITY. THE COLORS ON THIS ARE AMAZING!”

UPDATE: **SOLD** was on eBay.

This issue of the magazine ponders the jeep as a farming tool. The article is called “Someday We’ll Pu the Harness on the Jeep”, by Arnold Nicholson.You can see the article and imagines here.

UPDATE: **SOLD** Was $2800.

Looks like a good price.

“1960 CJ3B runs & drives”

Might be a good price.

“Rebuilt flathead 6 engine and rebuilt transmission. Needs new paint for complete restoration. No rust. Drives great!”

http://albuquerque.craigslist.org/cto/4737993181.html

UPDATE: **SOLD** Was No Price

This jeep was part of a farm sale that took place ending yesterday (Saturday). Unfortunately, I didn’t see the ad until Saturday night. However, maybe the 3B is still available?

“UPCOMING CNR Estate FARM SALE
SALE IS OCT. 30, 31, NOV. 1st
11330 Larue Rd. Toppenish, Wa.
*From Yakima get on Hwy. 97 out of Union Gap, at light turn South onto Lat. A, cross through Fort Rd. and next Rd. is Larue. Turn west and follow signs.

*From Lower Valley get on Hwy. 97 going south towards Goldendale, turn west onto Larue Rd. go 11.3 miles. House on the left in orchard. Follow CNR Signs. Property is secured electronically and physically 24-7 during the duration of this sale.Numbers given out at 8am Thursday only. Sale starts promptly at 9am. All 3 days Open 9 to 4. Everyone will be let in at the same time.

THIS IS A TAG PRICED SALE NOT AN AUCTION!This sale is HUGE…Milk Barn, House, Meat Butcher Shed, Cold Room Shed, Tool Shop,Undercover Open Bay Areas, Huge Shop, Cow Shed and more!!!! Bring boxes for Smalls!!!Visit our http://www.cnrestatesales.com website to view photos we’ve taken so far. Click on Sale “Farm Sale Photos” Album then at top of page above large photo click on “Slideshow” Option.”

UPDATE: Was $500. **SOLD**

There’s value here.

“selling 48 jeep willies 4cyl needs to be rebuilt someone took the head off and never bolted it back down floor pans r go one in front asking 500”